Now in stock matrice 200 series

DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal (No Remote-Charger)

DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal (No Remote-Charger)

USD$1,699.00
DJI Authorized Distributor
SKU: CP.BX.000158

Availability: Available On Backorder

Brief Description:

Inspire 1 PART 93 Aircraft(Excludes Remote Controller and Battery Charger) (NA&EU, V2.0) Dangerous Goods. Lithium ION battery included with equipment. UN3481, Class 9, Packing Group II.

OR
SHARE
WarehouseQuantity in stock
Mississauga, ONAvailable on Backorder
Buffalo, NYAvailable on Backorder
Calgary, ABAvailable on Backorder
Find the nearest warehouse

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum..

Overview

Details

  • Capture 4K Video and 12MP Stills
  • 3-Axis Gimbal Stabilizes Camera
  • Up to 1.2 Mile Radio Range
  • GPS-Based Flight Control System
  • Vision Positioning for Indoor Flying
  • Live 720p HD Monitoring with Lightbridge
  • Thrust-Boosted Motors / New Propellers
  • Retractable Carbon Fiber Arms
  • Unobstructed 360° Shooting
  • Dual-Transmitter Operation Supported

 

Performance
Hovering Accuracy (GPS Mode)Vertical: 1.6' / 0.5 m
Horizontal: 8.2' / 2.5 m
Maximum Angular VelocityPitch: 300°/s
Yaw: 150°/s
Maximum Tilt Angle35°/s
Maximum Ascent/Descent SpeedAscent: 16.4 fps / 5 m/s
Descent: 13.1 fps / 4 m/s
Maximum Speed72.2 fps / 22 m/s (Attitude mode; no wind)
Maximum Flight Altitude14,764' / 4,500 m
Maximum Wind Speed Resistance32.8 fps / 10 m/s
Maximum Flight TimeWith Zenmuse X3: Up to 18 minutes
With Zenmuse X5/X5R: Up to 15 minutes
Camera
ModelName: X3
Designation: FC350
SensorSony EXMOR 1/2.3" CMOS
Resolution12.0 MP
LensField of View: 94°
Focal Length (35 mm Equivalent): 20 mm
Aperture: f/2.8
Design: 9 elements in 9 groups; aspherical lens element
Filters: Anti-distortion filter; UV filter
Video RecordingUHD (4K):
4096 x 2160: 24p, 25p
3840 x 2160: 24p, 25p, 30p

FHD (1080p):
1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p

HD (720p):
1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p

Maximum Bitrate: 60 Mbps
File FormatPhoto: JPEG, DNG
Video: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264)
Recording MediaType: microSD/SDHC/SDXC up to 64 GB
Speed: Class 10 or faster
Format: FAT32/exFAT
Photography ModesSingle shot
Burst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias)
Time-lapse
Operating Temperature32 to 104°F / 0 to 40°C
Gimbal
ModelZenmuse X3
Number of Axes3-axis
Control Accuracy±0.03°
Maximum Controlled Rotation SpeedPitch: 120°/s
Pan: 180°/s
Controlled Rotation RangePitch: -90° to +30°
Pan: ±330°
Angular Vibration Range±0.03°
Output PowerStatic: 9 W
In Motion: 11 W
Operational CurrentStatic: 750 mA
In Motion: 900 mA
MountingDetachable
Flight Controller
Indoor HoveringEnabled by default
Optical Sensor (Optical Flow)Frequency: 50 Hz
Velocity Range: Below 26.2 fps / 8 m/s (6.6' / 2 m above the ground)
Altitude Range: 2 to 196.8" / 5 to 500 cm

Operating Environment: Rich pattern surface with adequate lighting (> 15 lux)
Operating Range: 0 to 8.2' / 0 to 2.5 m
Motor
ModelDJI 3510H
Motor Velocity Constant420 Kv
Maximum Thrust4.8 lb / 2200 g at 25 V and sea level
Weight3.8 oz / 107 g
Propeller
ModelDJI 1345
Flight Battery
ModelTB47
Voltage6S LiPo; 22.2 VDC
Capacity4500 mAh / 99.9 Wh
Maximum Charging Power180 W
Operating Temperature-4 to 104°F / -20 to 40°C
Storage Temperature-4 to 113°F / -20 to 45°C
72 to 82°F / 22 to 28°C
Charging Temperature32 to 104°F / 0 to 40°C
Weight1.3 lb / 570 g
Mobile App
System RequirementsiOS: 7.1 or later
Android: 4.1.2 or later

Note: The device must be connected to a transmitter via USB (wireless linking is not supporting). Additionally, waypoint navigation requires an active Internet connection in order to load the maps
General
ModelAircraft: T600
Operating Temperature14 to 104°F / -10 to 40°C
DimensionsDiagonal Distance:
Landing Gear Lowered: 22" / 559 mm
Landing Gear Raised: 22.9" / 581 mm

Overall Dimensions:
17.2 x 17.8 x 11.9" / 438 x 451 x 301 mm
WeightWith Battery: 6.5 lb / 2.9 kg

Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input.

As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode).

This bundle includes the Inspire 1 along with gimbal camera and a flight battery. The radio controller (transmitter) and battery charger are required, available separately.

What's New for v2?

Zenmuse X5/X5R Compatibility

In addition to the included Zenmuse X3, this version of the Inspire 1 also works with the Zenmuse X5 and X5R gimbal cameras (available separately)


New Propulsion S
Specifications

Additional Information

Manufacturer DJI
Drone Type Multirotor
Product Line Inspire
Product Group Combo
Product Series Inspire 1
Reviews

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register