Skip to Store Area:

Gap Wireless Online Store

Advanced Measurement Seminar 2017

Monday, August 21, 2017 12:05:07 PM EDT

Join us and Keysight Technologies for the upcoming Advanced Measurement Seminar 2017


Why this seminar is important: Today's engineers working in communications, consumer electronics and aerospace-defense are faced with increasingly complex measurement challenges and rapidly changing technology. This full day complimentary seminar (lunch included) will discuss the latest and most advanced methods for characterizing complex active devices/components up to 125 GHz. We will also discuss the newest techniques for 5G over-the-air (OTA) testing, differential device, I/Q modulator, and noise figure characterization.


What to expect: This full day seminar will include a series of lectures, interactive discussions, and product demonstrations. Morning refreshments and lunch will be provided.


Who should attend: RF and Microwave design engineers, test engineers and lab technologists/technicians.


Cost: Free



Wednesday, September 13
Holiday Inn & Suites Ottawa Kanata
101 Kanata Avenue
Kanata, ON K2T1E6

Thursday, September 21

Element Vancouver Metrotown
5988 Willingdon Ave
Burnaby, BC V5H 2A7




Joel Dunsmore, R&D Engineer, Keysight Technologies

Since graduating from Oregon State University with an MSEE (1983), Joel Dunsmore has worked for Keysight Technologies (formerly Agilent and Hewlett-Packard) at the Santa Rosa Site. He received his Ph.D. from Leeds University in 2004. He is a Keysight R&D Fellow focused on component test. He was a principle contributor to the HP 8753 and PNA family of network analyzers, responsible for RF and Microwave circuit designs in these products. Recently, he has worked in the area of non-linear test including differential devices, and mixer measurements, as well as modulated and spectrum measurements. He has received 26 patents related to this work, and authored the “Handbook of Microwave Component Measurements”. He co-taught an RF course at the University of California, Berkeley, and presented several short courses and seminars through ARFTG, MTT and Keysight


Mirin Lew, Solution Planner, Keysight Technologies

Mirin Lew is a Solution Planner for the Communications Solutions Group of Keysight Technologies, focusing on solution and strategic planning and marketing for 5G applications and 802.11ax wireless LAN. Mirin joined Hewlett-Packard in 1987, and through the company’s transition to Agilent Technologies and then to Keysight Technologies, Mirin held a variety of marketing, planning, and applications support roles related to signal generator, signal analyzer, and network analyzer products. Her previous applications experience includes base station testing, signal generation and analysis for 802.11n/ac WLAN, GPS and Global Navigation Satellite Systems (GNSS), and WiMAX, as well as MIMO testing and fading channel emulation. Mirin earned a B.S. in electrical engineering from the University of California at Davis and an M.S. in electrical engineering from Stanford University. 


Click here to Register Now!


Co-sponsored by:


Read More
Posted in Products News By Pamela Gedney

Join Gap Wireless and Keysight Technologies for the upcoming webcast: Smart Testing to Limit Your Risk Exposure in Wireless Medical Devices


Event Date: Wednesday, August 23, 2017


Event Time: 1:00 PM ET | 10:00 AM PT


Hosted by: Electronic Design


Sponsored by: Keysight Technologies and Gap Wireless


Why this webcast is important:

The complexity of today's electromagnetic environment means that even well-designed wireless medical devices may encounter challenges that could lead to an FDA Form 483, a warning letter, or even patient harm. This seminar will cover the risks and requirements associated with today's wireless medical devices and test techniques to reduce the risk to patients and to medical device manufacturers. By using test equipment including FieldFox, you can test with more confidence. Learn more today!


Who should attend:

Medical device manufacturers, technicians who service medical electronic equipment, R&D, and design validation.


Webcast presenter: Jake Daly, SA Product Brand Specialist, Keysight Technologies


Click here to Register Now!

Sponsored By:


Hosted By:


Read More
Posted in Products News By Pamela Gedney

Sharing Technology with the Next Generation

Wednesday, June 14, 2017 3:50:38 PM EDT

Keysight Technologies and Gap Wireless are pleased to offer you full color printed posters to use in your labs and classrooms to highlight the latest technologies.  


Choose from the Internet of Things, LTE and LTE-Advanced, MIMO and Massive MIMO or ALL of them!  

Industry posters help bring new technology to the next generation. In classrooms and teaching labs, Keysight instruments and software offer students experience with the same tools used in industry. 

Share technology with the next generation! Click here to request these posters today! 

Read More
Posted in Promotions & Discounts By Pamela Gedney

Join us and Keysight Technologies for the upcoming webinar: Verifying RF Short Range Communication in IoT 

Event Date: Tuesday, June 27, 2017

Event Time: 1:00 PM ET | 10:00 AM PT

Hosted by: Electronic Design

Sponsored by: Keysight Technologies and Gap Wireless

Why this webcast is important:

IoT involves wireless networks that must accurately and instantaneously communicate to each other and to the cloud. Verifying the signal robustness of these radio links is key for ensuring a design’s integrity. This webcast will cover measurement and test methods of short-range communications including Bluetooth, Zigbee, Z-wave, and Sub-GHz. RF test solutions that meet a variety of application needs ranging from automotive, home automation to healthcare will be demonstrated. 

Webcast presenter: Jake Daly, SA Product Brand Specialist, Keysight Technologies

Click here to Register Now!

Sponsored By:


Hosted By:


Read More
Posted in News By Pamela Gedney

Buy Any Keysight Big5 Bench, Get A Complimentary Handheld!

Thursday, June 1, 2017 10:01:03 AM EDT

Empower your engineers with a handy, reliable tool for carrying out measurements and tests on the go – whenever, wherever.

Be eligible to receive the Keysight U1242C Handheld DMM (worth USD$300) at no cost when you buy a Keysight Big5 Bench equipment. The complimentary U1242C is IP67 certified (water and dust resistant) with up to 400 hours of long battery life.

Take advantage of this offer – Contact us today!

Qualifying Keysight products include:

Big5 Bench Product Families

Promotion Products

Product Description

Big5 Bench 1: Low-Profile Modular Power System (MPS) & DC Power Analyzer
Accelerate ATE with small, flexible, fast DC power.


Low-Profile Modular Power System Mainframe, 400 W


Low-Profile Modular Power System Mainframe, 600 W


Low-Profile Modular Power System Mainframe, 1200 W


DC Power Analyzer, 600 W

Big5 Bench 2: Programmable DC Power Supply
Power your designs safely and quietly during manual tests or automated sequences.


Single-Output DC Power Supply, 6 V, 5 A, 30 W


Single-Output DC Power Supply, 20 V, 2 A, 40 W


Single-Output DC Power Supply, 35 V, 1 A, 35 W


Single-Output DC Power Supply, 60 V, 0.6 A, 36 W


Single-Output DC Power Supply, 100 V, 0.4 A, 40 W

NEW! E36311A

Triple-Output DC Power Supply: 6 V, 5 A and ±25 V, 1 A, 80 W

NEW! E36312A

Triple-Output DC Power Supply: 6 V, 5 A and 2 x 25 V, 1 A, 80 W

NEW! E36313A

Triple-Output DC Power Supply: 6 V, 10 A and 2 x 25 V, 2 A, 160 W

Big5 Bench 3: DAQ / Data Logger Switch Unit 
Create more measurement possibilities in less time.


DAQ/Data Logger Switch Unit, GPIB & RS-232 connectivity


LXI DAQ/Data Logger Switch Unit, LAN & USB connectivity

Big5 Bench 4: Trueform Waveform Generator 
Exclusive technology for lowest jitter, harmonic and non-harmonic distortion.
ECN2015 Impact Awards and EDN 2015 Best in Design & Test Award Finalist.


Waveform Generator, 80 MHz, 1-channel


Waveform Generator, 80 MHz, 2-channel


Waveform Generator, 120 MHz, 1-channel


Waveform Generator, 120 MHz, 2-channel

Big5 Bench 5: B2900 Precision SMU/Low-Noise Power Source/Picoammeter/Electrometer
Ideal for sensitive, low-level current measurements. B2987A is EDN 2015 Best in Design & Test Award Finalist.


Precision Source/Measure Unit, 100 fA, 1-channel


Precision Source/Measure Unit, 100 fA, 2-channel


Precision Source/Measure Unit, 10 fA, 1-channel


Precision Source/Measure Unit, 10 fA, 2-channel


Low-Noise Power Source, 10 fA/100 nV resolution, 1-channel


Low-Noise Power Source, 10 fA/100 nV resolution, 2-channel


Femto/Picoammeter, 0.01 fA


Femto/Picoammeter, 0.01 fA, Battery option available


Electrometer/High Resistance Meter, 0.01 fA


Electrometer/High Resistance Meter, 0.01 fA, Battery option available         

*Special Offer valid until September 30, 2017.

For detailed Terms and Conditions, please refer to the promotion flyer. 

Read More
Posted in Products Promotions & Discounts News By Pamela Gedney

In digital standards, every generational change introduces new challenges and risks. In this seminar, Keysight will share industry expertise and discuss solutions for high-speed digital design and test to help you anticipate these challenges, reduce risks, and accelerate your designs. You will learn new design and test strategies for signal integrity/power integrity, USB/Type-C, 400G/PAM4, PCIe Gen4, DDR4/LPDDR4, as well as new data analytics tools.



There will be presentations focused on high-speed digital design and test and demonstrations by Keysight experts.



Design engineers, signal integrity engineers, quality engineers, validation engineers, test engineers, architects, project managers, program managers, application managers, and application engineers.





Register Now!




Tuesday, April 4, 2017

Sheraton Parkway Toronto North

600 Highway 7 East

Richmond Hill, ON L4B 1B2

Thursday, April 6, 2017

The Marshes

320 Terry Fox Dr.

Ottawa, ON K2K 321

Friday, April 7, 2017

Novotel Montreal

2599 Blvd. Alfred Nobel

Ville St. Laurent, QC H4S 2G1

Wednesday, April 12, 2017

Hilton Vancouver Metrotown

6083 McKay Ave.

Burnaby, BC V5H 2W7


PLUS! Attendees will have a chance to win a quadcopter drone!


For more information, click here.


Register Now! 

Read More
Posted in News By Pamela Gedney

Keysight Test-Drive 2017 is coming to an area near you!

Wednesday, January 25, 2017 9:41:01 AM EST

Get your hands on the latest instruments. 

Here’s your chance to test-drive Keysight RF signal analyzers, network analyzers, oscilloscopes and bench instruments at a location near you. Try them out, see how they look, feel, and function.




This unique seminar features:


- Practical, hands-on labs using the latest RF, digital and bench instrumentation


- Course completion certificate



PLUS! A chance to win a U1273A handheld multimeter!




Attendance is limited so that you’ll get practical experience using the latest RF, digital and bench instrumentation. Learn common and emerging applications for a broad range of test equipment. Morning refreshments and a lunch will be provided.




Engineers, technicians and project managers that use or are evaluating test equipment, such as signal analyzers, signal generators, network analyzers, high-performance oscilloscopes and general bench instrumentation.







Santa Clara, CA - Agilent Technologies - Building 5
Tuesday, February 07, 2017
9:00AM - 4:30PM


San Diego, CA - Radisson Rancho Bernardo

Tuesday, March 14, 2017

9:00AM - 4:30PM

Montreal, QC - Novotel Montreal Aeroport
Wednesday, May 31, 2017
9:00AM - 4:30PM


Mississauga, ON - Mississauga Convention Centre

Tuesday, June 06, 2017

9:00AM - 4:30PM


Seating is limited and seminars fill quickly.


Click here to register today!

Read More
Posted in News By Pamela Gedney

Improve Your Data Acquisition IQ with Keysight Technologies!

Wednesday, October 12, 2016 2:20:05 PM EDT

Join Keysight for a 1 hour complimentary webcast: October 19, 2016 at 10 a.m. PT / 1 p.m. ET.


Co-sponsored by: Gap Wireless


Data acquisition is a term that encompasses a wide range of measurement applications, all of which require some form of characterization, monitoring, or control. No matter what the specific application, all data acquisition systems either measure a physical parameter (temperature, pressure, flow, etc.) or take a specific action (sound an alarm, turn on a light, etc.) based on the data received. Simply put, data acquisition is about measuring parameters of physical systems to gain insight into their behavior. The process of data acquisition includes sensing physical behavior, converting this behavior to electrical signals, sampling these signals, and analyzing them to gain insight into the behavior. This webcast will cover ideas for improving your data acquisition knowledge and skills.




Major points of discussion:

- The merging of engineering disciplines

- A basic definition of data acquisition

- Theoretical signals and the real world

- Difference between transducers and sensors

- The purpose of signal conditioning

- Does resolution lead to accuracy?

- Is this a static or dynamic measurement?

- Transforming the time and frequency domain

- Data acquisition system types (architectures)


Who should view this webcast:

This webcast is intended for engineers, and technicians who are responsible for the physical (electro-mechanical) design validation of their companies' products. Also, for scientists and engineers of national laboratories involved in research, and engineering departments at universities involved in research and education.



Read More
Posted in Promotions & Discounts News By Pamela Gedney

Win a Keysight Handheld Digital Multimeter or Oscilloscope!

Friday, September 30, 2016 12:47:32 PM EDT

Gap Wireless is hosting Weekly Prize Draws and we want YOU to be a part of it! Get a chance to win a Keysight U1282A Handheld Digital Multimeter, with a minimum purchase order of $1,000 in Keysight products.
But wait there’s more!
Because we love to see our customers smile, we’re hosting a Grand Prize Draw for a chance to win a Keysight MSOX3024A Mixed Signal Oscilloscope, with a minimum purchase order of $5,000 in Keysight products.
For More Details Click Here.
Hurry! Offer ends October 31st, 2016.
Read More
Posted in Promotions & Discounts News By Pamela Gedney

New Keysight 3000T X Series Scopes Released!

Friday, January 9, 2015 2:26:54 PM EST




Keysight launches the 3000T X-Series Oscilloscopes and Gap Wireless carries all of them!

Keysight improved on the proven. The new Keysight 3000T oscilloscope is the next-generation of the InfiniiVision X-Series. With its zone touch triggering, you can trigger on any signal in just two steps. So you can isolate a signal in seconds-much faster than with any competing scope. The 3000T is also a 6-in-1 instrument. Along with your oscilloscope, you can get an MSO, WaveGen function generator, protocol analyzer, DVM and counter.

Keysight 3000T X Series
Leading Competitor
Bandwidth 100 MHz - 1 GHz 100 MHz - 1 GHz
Update Rate Uncompromised 1M wfms/s Up to 280K wfms/s
Touch Screen 8.5-inch Capacitive No
Zone Touch Triggering Yes No
Sample Rate 5 GSa/s 2.5 GSa/s (>=500 MHz)
5 GSa/s (1 GHz)

Get in touch with the future of scopes. You can find all the new 3000T Scopes that Gap Wireless carries here. For more information about the scopes, please call Gap Wireless directly here.




Read More
Posted in Products By Scott Gordon